Home
About Us
Table Base Systems
Custom Coatings
Autophoretics
Green Statement
Shows
Contact
Employment Opportunities
 
     

Table Base Systems

Classic Column Series

Slim Line Series

Tubular Series

Fountain Series

Laser Cut Series

Pedestal Disk Series

Nester Series

Adjustable Hand Crank Series

Adjustable Electric Series

Numa-Lift Series

Economy Series

Accessories


Accessories

Mobile Table Cart
  • 1 1/2" 11 Gauge Steel tubing for structural supports
  • 1 1/2" 14 Gauge Steel tubing for non-load bearing supports and bent frames
  • 5" Dia., Casters 1/2 – 13 stems
  • Mechanically fastened and welded
  • Accommodates up to six 30" X 72" tops
  • Powder coat black wrinkle finish only
  • Shipped knocked down
P.N. Table Cart
 
Angle Mounting Brackets
  • 1 1/2" X 1 1/2" 16 Gauge Formed Steel
  • Multiple use
  • Powder coat flat black only
  • Screws not included
  • 2" angle or 10" angle sizes available
P.N. 00040 2" Long Angle
P.N. 00041 10" Long Angle
 
Stretcher Bar
  • 1 1/2" dia. 14 Gauge tubing
  • Secured with (4) 1/4 – 20 button head cap screw in threaded insert
  • 1 stretcher per 2 base
  • Top size is required to determine length of stretcher bar
  • Option not available on aluminum bases
P.N. Stretcher Bar
 
Anti-Sag Support Bars
  • 1" X 2" 14 Gauge rectangular steel tubing
  • 2 holes per 12" spacing
Item # Bar Length
ASB-4 4'
ASB-5 5'
ASB-6 6'
ASB-7 7'
ASB-8 8'
ASB-10 10'
ASB-12 12'
*Note: Available in flat black only
 
Wall Mount Cantilever Table Supports
  • 2" Square 16 Gauge steel tubing
  • Welded 1/4" mounting straps
  • Welded 1/8" angle iron reinforcement
  • 45 degree angle cut on 15 1/4" lengths, One 2" plastic cap provided
  • Straight cut on bottom of 25" lengths, Two 2" plastic caps provided
  • 45 degree support welded between wall mount and support bar
  • Screws not included
Item #
Table Bar Length
Wall Mount Bar Length
Max. Top Size
10050P
21"
15 1/4"
36" X 30"
10051P
29"
15 1/4"
48" X 36"
10052P
47"
15 1/4"
60" X 36"
10053P
21"
25"
36" X 30"
10054P
29"
25"
48" X 36"
10055P
47"
25"
60" X 36"
*Note: Not available in brushed steel or antique bronze.
 
Genu-Fold3™ — Folding Mechanism
Articulating Locking Mechanism — U.S. Patent Number 5,673,633
  • Nylon injection molded body with an extruded aluminum mechanism
  • Positive lock in folded and upright positions
  • Legs lay parallel with the bottom of the work surface when folded on tables as short as 57" long
  • Tables between 36" and 57" require the use of a riser bracket (see page 41) with one mechanism in order for legs to overlap and lay flat
  • May be purchased as an accessory to our base or separately. Contact our customer service department for customizing mechanisms
  • Fits the following single and double column end base series: Tubular Series and Fountain Series 105, 205 and 209

    *Note: Also available on 3" columns and X-Bases
P.N. 00252 Genu-fold Mechanism with Screws
P.N. Ganged Mechs Double Column Genu-fold with Ganger Bar
 
Post-Fold™ — Folding Mechanism
Articulating Locking Mechanism — U.S. Patent Number 6,394,005
  • Nylon injection molded body with an extruded aluminum mechanism
  • Positive lock in folded and upright positions
  • May be purchased as an accessory to our base or separately
  • Fits the following single base series: 2" Classic Column and 20000T Slim Line Tornado Leg
  • To be used with tops 60" dia. or less
P.N. 00258 Post-fold Mechanism with Screws
 
Genu-Fold™ Riser Brackets
Z-riser brackets are designed to allow the Genu-Fold™ folding mechanism to be used on tables between 36" and 57" long. The riser bracket raises the Genu-Fold™ off of the bottom of the work surface allowing one leg to fold over the other. One pair needed per table.
P.N. 00200 1 pair of 2 riser brackets and hardware to attach to 1 mechanism
 
Modesty Panel End Brackets
  • 7" X 10" – 1" X 2" Rectangular 14 gauge steel, welded
  • Two 1" X 2" black plastic caps and mounting screws
  • Can be used with removable modesty panel brackets
P.N. 51011 One pair of brackets to attach one modesty panel
 
Fixed and Removable Flip Top Mechanism
  • Fixed and removable flip top mechanisms allow the tables to be flipped into a position parallel to the column
  • Removable flip top mechanism allows top to be easily detached from base assembly
  • Allows for ease in storage and moving
  • May be purchased as an accessory to our base or separately
  • Fits the following single column end and x-base series: Tubular Series; Fountain Series 105, 205, 206 and 209 and the Pedestal Disk Series
P.N. 00049 Fixed Flip Top Mechanisms
P.N. 00159 Removable Flip Top Mechanisms
 
Removable Modesty Panel Brackets
  • Locks into place in upright and lowered positions
  • Lowering the modesty panel to a 45 degree angle to the base allows for detachment of modesty panel from base
  • Lowering the modesty panel to a 90 degree angle to the base allows for easy access for wire management needs
  • Available in powder coat flat black only
  • Attachment screws not included when ordered separately
  • Provide modesty panel size when ordering in conjunction with Valley Design bases
  • Can be used with Modesty Panel End Brackets
P.N. 5101 1 Pair (4 pieces) of Removable Modesty Panel Brackets to Attach 1 Modesty Panel
 
Easy Lock Table Ganger
  • 4" X 12" 11 gauge steel
  • 4 knobs per unit
  • Self storing
  • Only 1 unit required for tables up to 42" wide
  • Available in powder coat flat black only
P.N. 00310 Table Ganger with 4 Clamping Knobs
P.N. 00311 Table Ganger with 4 Clamping Knobs, 4 Table Inserts & 1 Insert Tool
 
Folding Locking Modesty Panel Brackets
  • 16 gauge formed steel side brackets with extruded aluminum locking mechanism
  • Positive lock in upright and folded positions
  • Allows for storage of modesty panel with work surface
  • Designed to complement storage of Genu-Fold™ bases

    *Note: Will not work with Nester Series.
P.N. 5000 1 Pair (2 pieces) of Folding Locking Modesty Panel Brackets to attach 1 modesty panel
 
Metal Perf. Modesty Panels
  • Modesty Panel Brackets attach to top and back of modesty panel
  • Specify Folding Locking Modesty Panel Brackets or Nester Modesty Panel Hinge for attachment
  • Allows Modesty panel to be folded under and parallel to top for easy storage
  • Designed to complement storage of Genu-Fold™ bases
  • Not for tops under 30" deep if Genu-Fold3 are not used
9" x 48"
9" x 60"
9" x 72"
 
Nester Modesty Panel Hinge
  • For use with Double Leg Nester Mechanism
  • Powerful magnets used to hold modesty panels 90 degrees to work surface
  • Pressure sensitive adhesive backed foam bumper pads for cushion against columns
  • Hands free operation
P.N. 5005