Valley Design Fountain MN

Genu-Fold3™

Mobile Table Cart 1 1/2" 11 Gauge Steel tubing for structural supports 1 1/2" 14 Gauge Steel tubing for non-load bearing supports and bent frames 5" Dia., Casters 1/2 – 13 stems Mechanically fastened and welded Powder coat black wrinkle finish only Shipped knocked down Load capacity 500 pounds	P.N. Table Cart
Genu-Fold3™ - Folding Mechanism Articulating Locking Mechanism U.S. Patent Number 5,673,633 Nylon injection molded body with an extruded aluminum mechanism Positive lock in folded and upright positions Legs lay parallel with the bottom of the work surface when folded on tables as short as 57" long Tables between 36" and 57" require the use of a riser bracket with one mechanism in order for legs to overlap and lay flat May be purchased as an accessory to our base or separately. Contact our customer service department for customizing mechanisms to suit your particular needs Fits the following single and double column end base series: Tubular Series and Fountain Series 105, 205 and 209
	P.N. 00252 Genu-fold Mechanism with Screws P.N. Ganged Mechs Double Column Genu-fold with Ganger Bar
*Note: Also available on 3" columns and X-Bases
How it Works Folding Locking Modesty Panel Brackets: How it works Modesty Panel and brackets attached in privacy position. Legs fold to allow easy access to back of Modesty Panel for running of wire and cable. Legs and Modesty Panel in folded position.
Genu-Fold™ Riser Brackets Z-riser brackets are designed to allow the Genu-Fold™ folding mechanism to be used on tables between 36" and 57" long. The riser bracket raises the Genu-Fold™ off of the bottom of the work surface allowing one leg to fold over the other. One pair needed per table.
	P.N. 00200 1 pair of 2 riser brackets and hardware to attach to 1 mechanism

View Other Accessories: